Examples of Typical Projects & Metallurgical Engineering Services

Failure analysis of cracking problem during stamping of automotive components.
Failure analysis of NASCAR Titanium Exhaust Valve that exhibited unusual pitting.
Failure analysis of fractured connecting rod in a NASCAR race engine.
Material selection for convection furnace tubes in a chemical processing plant.
Analysis of stress corrosion cracking in Heat Exchanger Tubing.
Failure analysis of corrosion resistant thermal spray coatings on boiler tubes.
Failure analysis of locomotive roller bearings.
Failure analysis of a leaking Diesel Engine Manifold.
Evaluation of TIG weldments in mechanical alloy steel tubing.
Testing and analysis of steel from a mixed batch from the supplier.
Analysis of paint failure in a marine environment.
Failure analysis of an automotive rear-end gear.
Failure analysis of a Leaking Oil Cooler from a diesel engine.
Failure analysis of erosion problem in chemical batch processing.
Failure analysis of creep damage and failure in super heater boiler tubes.
Analysis of a fractured Retention Stud from a CNC tool holder collet.
Failure analysis of failed soldering in a leaking refrigeration unit.
Failure analysis of weld overlay dilution problem in a digester.
Failure analysis of a fractured gear shift lever.
Analysis of pitting problem in a potable water system.
Analysis of crevice corrosion in a wet chlorine line fitting.
Failure Analysis of Failed Inconel Condenser Tube.
Analysis of fatigue failures in automotive exhaust valve springs.
Comparison testing of fabrication welding techniques.
Analysis of surface stains from defective parts cleaning process.
Analysis of failed hip replacement in a medical implant.